View 835-IF389M-E_4471339.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Oscilent Corporation IF SAW Filter | 835-IF38.9M-E
Page 1 of 3
IF SAW Filter Part Number Package Application Last Modified
835-IF38.9M-E
TYPE :
35.0 x 12.8 Thru Hole
Base Station & Repeater
Jan. 01, 2007
38.9 MHz Bandpass Filter
PART NUMBER :
835-IF38.9M-E
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple (34.2~39.4 MHz) Relative Attenuation (relative to Fo) 33.40 MHz 34.00 MHz 34.10 MHz 39.65 MHz 25.00 MHz~ 32.00 MHz 32.00 MHz~ 32.65 MHz 32.65 MHz~ 33.30 MHz 40.15 MHz~ 41.20 MHz 41.20 MHz~ 45.00 MHz Reflected wave signal suppression Group Delay Variation (p-p); smo 1% Absolute Delay at Fo 42 -0.5 -0.5 0.5 50 48 45 45 48 50 48 0.1 0.1 1.0 58 58 55 54 55 58 48 4.15 Minimum Typical 38.9 27.5 50 50 0.5 1.0 0.6 1.5 60 4.3 dB dB dB dB dB dB dB dB dB dB ns s Maximum 30.0 94 1.0 Units MHz dB ohm ohm ppm/C dBp-p
* with Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedances values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance.
PACKAGE OUTLINE
(mm)
Oscilent Corporation IF SAW Filter | 835-IF38.9M-E
Page 2 of 3
PIN Descriptions: IN-1, OUT 5, GROUND -2,3,4,6,Case, Index- Left bottom of Marking
TEST ENVIRONMENT
Source & Load Impedance: 50 ohm
FREQUENCY RESPONSE
Oscilent Corporation IF SAW Filter | 835-IF38.9M-E
Page 3 of 3
Part No.:
835-IF38.9M-E
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map

▲Up To Search▲

Price & Availability of 835-IF389M-E

	To Download 835-IF389M-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .